Ford Certified Collision Repair in Enid, Oklahoma

Stevens Ford Collision Center & Body Shop

From a parking-lot dent to more serious accident damage, Stevens Ford Collision Center is here to help get your vehicle—and your routine—back on track. Bring your vehicle to our dedicated collision facility in Enid for damage estimates, body repair, paint and refinishing, glass replacement, paintless dent repair, and help navigating the insurance repair process.

Collision Center

818 S Hoover St
Enid, OK 73703

Call the Body Shop

580-237-3040

Dennis Moore

Collision Center Manager

Collision Repair Without the Guesswork

After an accident, you already have enough to deal with. You should not also have to figure out where to take the vehicle, who to call, or what happens after an estimate. Stevens Ford Collision Center gives Enid drivers a clear place to start.

Our collision team can inspect the damage, build a repair plan, coordinate repair information with your insurance company when applicable, and keep the process moving toward getting your vehicle back on the road.

Ford Certified Collision Repair

Your Ford was engineered as a complete system, and repairing it after a collision requires more than simply making the damage look better. Ford Certified Collision Network facilities are evaluated for the training, equipment, repair procedures, and facility standards needed to work on today's Ford vehicles.

That means access to Ford repair procedures, vehicle-specific repair information, and the knowledge needed to address modern materials, electronics, safety systems, and structural components. When parts need to be replaced, talk with our team about Original Ford Collision Parts and the options included in your repair plan.

Free Collision Estimates

Start with an evaluation of the damage. Our team can inspect the vehicle, identify the areas involved, and prepare an estimate so you have a clearer picture of what the repair requires.

Body & Collision Repair

From dents and damaged doors to panels, paint, glass, and more involved accident damage, the repair plan is built around the needs of your specific vehicle.

Insurance Assistance

If an insurance claim is involved, our team can help provide the repair information needed during the process and work with you as approvals and repair decisions move forward.

Repair the Damage You See—and Check What You Don't

A damaged bumper, door, fender, or quarter panel may be the most obvious sign of a collision, but it is not always the whole story. An impact can also affect mounting points, alignment, glass, lighting, sensors, mechanical components, and other areas behind the exterior panels.

That is why the process begins with the vehicle itself, not a generic repair list. We evaluate what was damaged and build the repair around what your vehicle actually needs.

Ford vehicle undergoing collision and body repair

Auto Body Services at Stevens Ford Collision Center

Our Enid collision center provides more than one type of repair. Depending on the damage, your vehicle may need one or several of the services below.

Auto Body Repair

Repair damaged exterior panels and body components after minor or more involved collisions, based on the condition of the vehicle and the approved repair plan.

Paint & Refinishing

Restore repaired or replaced body areas with refinishing work designed to bring the vehicle's appearance back together after collision damage.

Paintless Dent Repair

For qualifying dents where the paint surface has not been significantly damaged, paintless dent repair may offer a less invasive way to restore the panel.

Automotive Glass Replacement

Windshields and other vehicle glass can be damaged during a collision. Our team can help determine the appropriate replacement needs for your vehicle.

Mechanical Repair

When an accident affects more than the body, the collision center can also address related mechanical repair needs as part of getting the vehicle back on the road.

Lifetime Repair Warranty

Stevens Ford Collision Center lists lifetime warranty coverage for qualifying collision repairs. Ask our team about the coverage and terms that apply to your repair.

Dennis Moore

Collision Center Manager

A Direct Point of Contact for Your Repair

Collision repair is easier when you know who to call. Dennis Moore is the Collision Center Manager at Stevens Ford and your direct contact for questions about estimates, vehicle drop-off, insurance information, repair planning, and the status of your vehicle.

If you already have a claim number, photos of the damage, or information from your insurance company, have it available when you call. Dennis can help you understand what the collision center needs from you and what comes next.

What Happens After You Contact the Collision Center?

Every accident is different, but the repair process should not feel mysterious. Here is the general path from damaged vehicle to completed repair.

Start With an Estimate

Contact Dennis and arrange for the vehicle to be evaluated. Bring any insurance or claim information you already have.

Review the Damage

The collision team evaluates the affected areas and develops a repair plan based on the damage found on your vehicle.

Coordinate Approvals

If insurance is involved, repair information can be shared as needed while your insurer handles the policy, deductible, and approval side of the claim.

Repair & Final Review

Once approved work is completed, the repaired areas are reviewed before the vehicle is returned to you.

Before You Bring the Vehicle In

Take Photos

If it is safe to do so, photograph the damaged areas and keep any accident documentation together.

Pay Attention to Changes

Tell us about warning lights, new noises, steering changes, fluid leaks, or other symptoms that appeared after the accident.

Bring Your Claim Information

If you already opened a claim, bring the claim number and insurance contact information so the team has it available from the beginning.

Your Vehicle. Your Repair Shop.

Your insurance company may recommend a repair facility, but the choice of where to have your vehicle repaired belongs to you. If you want your Ford repaired at a Ford Certified Collision Network facility, you can choose Stevens Ford Collision Center.

Insurance coverage still depends on your individual policy. Your carrier determines deductibles, covered repairs, and claim approvals, while the collision center handles the repair evaluation and repair work.

Ask About Original Ford Collision Parts

Parts choices matter after an accident. Original Ford Collision Parts are engineered for Ford vehicles and designed around the same fit, materials, and specifications used in the vehicle's original construction.

If OEM parts are important to you, review your insurance policy and ask about parts coverage before repairs begin. Dennis can also walk through the parts included in the repair estimate so you understand what is being proposed.

Collision Center or Ford Service Center?

Both are part of Stevens Ford, but they serve different needs—and they are not at the same location.

Come to the Collision Center For:

Accident damage, bodywork, dents, damaged panels, collision-related paint or glass work, insurance repairs, paintless dent repair, and related collision damage.

818 S Hoover St
Enid, OK 73703

Call the Collision Center

Go to the Ford Service Center For:

Oil changes, brakes, tires, batteries, routine maintenance, mechanical diagnostics, warning lights, and other regular service needs not related to collision damage.

Visit the Stevens Ford Service Center

Visit Stevens Ford Collision Center in Enid

The collision center is located on South Hoover Street, separate from the main Stevens Ford dealership on West Garriott Road.

Collision Center Location

If you are bringing in a vehicle for accident damage, body repair, paint work, or another collision-related need, use the Hoover Street location below.

Stevens Ford Collision Center
818 S Hoover St
Enid, OK 73703

Collision Center Manager:
Dennis Moore

Phone:
580-237-3040

Email:
dennismoore@stevensford.com

Get Directions

Collision Center Hours

Body Shop
Day Open Closed
Monday 8:00AM 6:00PM
Tuesday 8:00AM 6:00PM
Wednesday 8:00AM 6:00PM
Thursday 8:00AM 6:00PM
Friday 8:00AM 6:00PM
Saturday Closed Closed
Sunday Closed Closed

Holiday hours may vary. Call 580-237-3040 if you would like to confirm availability before your visit.

Collision Center FAQs

Where is Stevens Ford Collision Center?

Stevens Ford Collision Center is located at 818 S Hoover St, Enid, OK 73703. It is separate from the main Stevens Ford dealership on West Garriott Road.

What are the Stevens Ford Collision Center hours?

Current collision center hours are listed in the Hours & Directions section above. Holiday hours may vary, so call 580-237-3040 if you need to confirm availability.

Does Stevens Ford Collision Center offer free estimates?

Yes. Contact Dennis Moore at 580-237-3040 to discuss the damage and arrange the next step for an estimate.

Can Stevens Ford Collision Center work with my insurance company?

The collision center offers insurance-company assistance and can provide repair-related information during the claims process. Your insurance carrier determines coverage, deductibles, and claim approvals.

Does the collision center repair dents?

Yes. Paintless dent repair is among the services offered. Whether PDR is appropriate depends on the size and location of the dent and the condition of the paint.

Does Stevens Ford Collision Center replace auto glass?

Automotive glass replacement is available. Contact the team to discuss the damaged glass and the needs of your specific vehicle.

How long will my collision repair take?

Timing depends on the damage, parts availability, insurance approvals when applicable, and any additional damage found after the repair process begins. The team can provide a more useful timeline once the vehicle has been evaluated.

Get Your Repair Started

If your vehicle has been damaged in an accident, call Stevens Ford Collision Center and speak directly with Collision Center Manager Dennis Moore. We'll help you understand the next step and get the repair process moving.